A conventional millimeter-wave stepped frequency continuous wave (SFCW) synthetic aperture radar (SAR) imaging system generally utilizes IQ modulation technique to acquire the amplitude and phase of the waves scattered from a target object. Due to measure both in-phase signal and quadrature signal, the transceiver of the conventional system is complicate and costly, and the IQ imbalance problem makes the system difficult to calibrate. To reduce hardware complexity and enhance efficiency-cost ratio, a novel SFCW SAR imaging system only measuring in-phase signal is proposed and demonstrated. For lack of quadrature signal measurement, an algorithm based on Fourier transform is proposed to estimate the amplitude and phase. The ultimate images are obtained through an image-reconstruction algorithm, which uses the estimated amplitude and phase as input parameters. The proposed system is verified by both simulation and experiment, where the frequencies are set from 24GHz to 30GHz. The imaging results with high resolution and low noise are demonstrated. Compared to the conventional system, the image quality of the proposed system is almost identical, but the transceiver of the proposed system is greatly simplified.Using micro-optic collimator technology, we present compact, low-loss optical interconnection devices for hollow core fibers (HCFs). This approach is one of the key manufacturing platforms for commercially available fiber optic components and most forms of HCFs can readily be incorporated into this platform without the need for any substantial or complicated adaptation or physical deformation of the fiber structure. Furthermore, this technique can provide for very low Fresnel reflection interconnection between solid-core fiber and HCF and in addition provides a hermetic seal for HCFs, which can be a critical issue for many HCF applications. In this paper, several exemplar HCF components are fabricated with low insertion loss (0.5-2 dB), low Fresnel reflection (-45 dB) and high modal purity (>20 dB) using various state-of-the-art HCFs.We report that cylindrical hyperbolic metamaterials (CHMMs) exhibit superscattering (SSc) in the visible region, based on analytical and numerical calculations. It has normalized scattering cross-section (NSCS) twice as large as that from cylinders consisting of homogeneous materials. AR-A014418 This large NSCS is due to constructive interference of multipolar resonances. Finite-difference time-domain calculations revealed that the spatial field-distribution at the SSc condition is similar to that of a whispering gallery mode (WGM), suggesting that the WGM-like field distribution is responsible for the large scattering. It is also reported that the SSc can be achieved in CHMM of epsilon near zero materials.We report an efficient mechanism to generate mechanical entanglement in a two-cascaded cavity optomechanical system with optical parametric amplifiers (OPAs) inside the two coupled cavities. We use the especially tuned OPAs to squeeze the hybrid mode composed of two mechanical modes, leading to strong macroscopic entanglement between the two movable mirrors. The squeezing parameter as well as the effective mechanical damping are both modulated by the OPA gains. The optimal degree of mechanical entanglement therefore depends on the balanced process between coherent hybrid mode squeezing and dissipation engineering. The mechanical entanglement is robust to strong cavity decay, going beyond simply resolved sideband regime, and is resistant to reasonable high thermal noise. The scheme provides an alternative way for generating strong macroscopic entanglement in cascaded optomechanical systems.Metal films are often used in optoelectronic devices as mirrors and/or electrical contacts. In many such devices, however, the π-phase shift of the electric field that occurs upon reflection from a perfect electric conductor (for which a metal mirror is a reasonable approximation) is undesirable. This is because it results in the total electric field being zero at the mirror surface, which is unfavorable if one wishes for example to enhance absorption by a material placed there. This has motivated the development of structures that reflect light with zero phase shift, as these lead to the electric field having an anti-node (rather than node) at the surface. These structures have been denoted by a variety of terms, including magnetic mirrors, magnetic conductors, and high impedance surfaces. In this work, we experimentally demonstrate a long-wave infrared device that we term a magnetic mirror. It comprises an array of amorphous silicon cuboids on a gold film. Our measurements demonstrate a phase shift of zero and a high reflectance (of ∼90%) at a wavelength of 8.4 µm. We present the results of a multipole analysis that provides insight into the physical mechanism. Lastly, we investigate the use of our structure in a photodetector application by performing simulations of the optical absorption by monolayer graphene placed on the cuboids.A dual-parameter sensor based on a photonic crystal fiber (PCF) concatenated with a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of magnetic field and temperature. Novel magnetic fluids (MF) with different concentration and surfactant are filled in the air holes of PCF. The magnetic field measurement property is only determined by PCF, while the temperature is co-determined by PCF and FBG. Experimental results show that the wavelength shift has a good linearity corresponding with temperature and magnetic field. Temperature and magnetic field sensitivity are proportional to concentration of MF and are affected by different surfactants. For PCF point, when polyethylene glycol is used as a surfactant and the magnetic fluid concentration is equal to 0.15, the highest magnetic field sensitivity is up to 924.63 pm/mT. The proposed sensor has a high sensitivity as well as cross-sensitivity resistance, which provides a promising candidate for dual-channel filtering or multi-parameter measurement applications.The presence of a ship in water disturbs the ambient light field and propagates errors to radiometric measurements. This study investigated the ship perturbation via Monte Carlo simulations with a reflective 3D ship. It is found that the height of ship could cause significant perturbation. However, these perturbations could be compensated by the reflection of the ship’s hull, where such compensations vary from sun angle to hull’s reflectance. Further, as a rule of thumb, to keep the perturbation on water-leaving radiance under ∼3% from an operating ship, a look-up table is generated with the requirements of viewing angle for the radiometers operated at the deck and for the deployment distance of floating and profiling instruments.